Sprachauswahl / Choose your language                       
Follow us on          

AMS Getränketechnik GmbH

Swing Stopper Closing Machine  "Dual Carousel":



Suitable for bottles with plastic head swing stoppers (conical or flat shape) or porcelain head swing stoppers with rubber seals.


The pre-filled bottles are transported by an infeed worm from the conveyer belt to the rotating in-feed star. The in-feed star then passes the bottles to the rotating lever stars. They separate and transport the bottles to the conveyer stars. The bottles stand on a turntable and are initially guided along the bottle alignment rail. Here, the bottle is slowed down by a belt and is forced to rotate. When the bottle reaches the correct position, the clip is fixed into the guide. In the next station, the stopper is positioned onto the mouth of the bottle. The swing top is then pressed down by a pneumatically operated locking barrel, and finally the bottle is returned to the conveyer belt by an out-feed star. In the out-feed star, the clamping force of the clip is checked and the bottle is returned to the conveyer belt. If the clamping force is too low, the bottles are re-opened and identified by an infra-red sensor.


All elements are made from rust-proof stainless steel (1.4301) and hard-wearing, durable plastic (PAS 10 and PAX LX). Soiling can be rinsed off with hot water (up to 90° C). The moisture created by this acts as a lubricant when the plant is re-started. The lower part of the plant is formed by a solid frame which is welded together from NIRO stainless steel tubes. The upper part of the plant is fitted with a transparent protective covering as standard.



BV 30

BV 40

Number of locations



Rated capacity

24.000 Bph

30.000 Bph

Max. capacity

27.000 Bph

32.000 Bph


5.315 mm

5.355 mm


3.125 mm

4.205 mm


3.085 mm


5.000 kg

6.800 kg

Power consumption

max. 7,5 kW

Operating voltage

400 V, 50 Hz

Control voltage

24 V=

Control air

5,5 … 10 bar



1994-2018 © AMS Getränketechnik GmbH

Imprint  l  AGB